Name | Project Role |
---|---|
Santiago Arribas | Co-I / Science Team |
Alejandro Crespo | Science (PhD Student) |
Alberto Estrada Piqueras | Mechanical Engineer |
Miguel Pereira Santaella | Project Scientist |
Javier Piqueras Lopez | Institute Project Manager for CAB / Calibration Scientist |
Name | Project Role |
---|---|
Jeremy Blaizot | Science Team |
Nicholas Bouché | Co-I |
Didier Boudon | IFU mechanical design and manufacture. |
Diane Chapuis | IFU mechanical design |
Eric Daguise | IFU mechanical modelling and analysis. |
Karen Disseau | IFU MAIT |
Matthieu Guibert | Mechanical Engineer |
Aurelien Jarno | Science Software: Instrument Numerical Model / Data Reduction Software. IFU: AIT software. |
Alexandre Jeanneau | Optical Designer |
Florence Laurent | IFU Design and MAIT |
Magali Loupias | IFU System Engineering / design and MAIT |
Jean-Emmanuel Migniau | IFU Mechanical Design and MAIT |
Laure Piqueras | Science Software: Data Reduction Software / Instrument Numerical Model. |
Alban Remillieux | Institute Project Manager / IFU Management |
Johan Richard | Deputy Co-I / Science Software scientist. |
Arlette Pecontal | Software System Engineer / Science software. |
Name | Project Role |
---|---|
Lisa Bardou | AO Scientist |
Rishi Deshmukh | Mechanical Engineer (LOB) |
Sofia Dimoudi | RTC Software |
Marc Dubbledam | Mechanical Engineer |
David King | Optical Engineer (LOB) |
Simon Morris | Link to Mosaic team |
Tim Morris | Adaptive Optics |
Kieran O'Brien | CoI |
Lazar Staykov | DM Tests |
Mark Swinbank | Science Team |
Matthew Townson | Real Time Control |
Eddy Younger | RTC Software |
Name | Project Role |
---|---|
Matteo Accardo | Mechanical Design for Optical Detector mosaics |
Domingo Alvarez Mendez | Electronic Design for the Detector Modules of HARMONI |
Ralf Conzelmann | Mechanical Design for NIR Detector mosaics |
Elizabeth George | Detector Engineer and IPM for Detectors WP |
Joshua Hopgood | Detector Engineer (VIS) |
Derek Ives | Detector Procurement |
Leander Mehrgan | Detector Controller Systems |
Eric Mueller | Opto-mechanical alignment |
Name | Project Role |
---|---|
Angel Alonso Sanchez | Institute Project Manager for IAC |
Giuseppina Battaglia | Science Team |
Miguel Cagigas | Optical Engineer |
José Miguel Delgado | Electronics Engineer |
Patricia Fernandez Izquierdo | Mechanical Engineer |
Ana Belén Fragoso López | Optical Engineer |
Begoña Garcia-Lorenzo | Deputy Co-I for IAC / Science Team Member |
Elvio Hernandez Suarez | Mechanical Engineer |
Jose-Miguel Herreros | Institute Project Manager for IAC |
Enrique Joven | Electronics Engineer |
Roberto López | Optical Engineer |
Yolanda Martín Hernando | Electronics Engineer |
Evencio Mediavilla | Co-I / Science Team |
José Peñate Castro | Mechanical Engineer |
Jose Luis Rasilla | Optical Design - Pre-optics |
Rafael Rebolo | Science Team |
Luis Fernando Rodríguez Ramos | Lead Electronics Engineer / WP Manager for Instrument Control Electronics |
Alfrodisio Vega Moreno | Mechanical Engineer |
Teodora Viera | Electronic Engineer |
Name | Project Role |
---|---|
Alexis Carlotti | WP Manager for the High Contrast Module |
Jean-Jacques Correia | LDM Mechanical Design |
Alain Delboulbe | AIT HCM / LDM |
Sylvain Guieu | Control Software HCM / LDM |
Adrien Hours | HCM (PhD Student) |
Zoltan Hubert | LDM system engineer / management |
Laurent Jocou | HCM system engineer / management |
Laurent Jocou | HCM System Engineer |
Yves Magnard | HCM Mechanical Design |
Thibaut Moulin | MAIT HCM / LDM |
Fabrice Pancher | HCM Control Software |
Patrick Rabou | HCM and LDM Optical Design |
Eric Stadler | HCM Mechanical Design |
Name | Project Role |
---|---|
Thierry Contini | Science Team |
Marie Larrieu | Instrument Software (Acting Lead on ICS) |
Name | Project Role |
---|---|
Yan Fantei-Caujolle | Instrument Control System |
Daniel Lecron | Instrument Control System |
Sylvain Rousseau | Instrument Control System |
Name | Project Role |
---|---|
Olivier Beltramo-Martin | Postdoc working on PSF date processing |
William Bon | Mechanical Design |
Anne Bonnefoi | Mechanical Architectue and Design |
William Ceria | LGSS Mechanical Design |
Elodie Choquet | Science Team |
Carlos Correia | AO |
Anne Costille | LGSS SE / HARMONI Top-End AIT |
Kjetil Dohlen | AO System Engineer for HARMONI / NGSS System Engineer |
Franck Ducret | LAM PA/QA |
Kacem El Hadi | Institute Project Manager / MAIT |
Benoit Epinat | Science Team |
Jean-Luc Gach | Detector specialist |
Olivier Groussin | Science cases for the solar system (HSIM) |
Issa Jaafar | Control Engineer |
Joel Le Merrer | Opto-mechanical design |
David Le Mignant | HARMONI Consortium Deputy Project Manager |
Marc Llored | Opto-mechanical design |
Benoit Neichel | Deputy PI / Responsible for the LTAO module |
Felipe Pedreros | LGS WFS |
Edgard Renault | NGSS and LGSS |
Patrice Sanchez | Mechanical Design SCAO |
Arthur Vigan | Science Team |
Pascal Vola | Optomechanical Design / LGSS / SCAO |
Name | Project Role |
---|---|
Caroline Lim | AO Simulation |
Nicolas Vedrenne | ONERA Management |
Thierry Fusco | AO Scientist / Deputy Co-I for LAM |
Cyril Petit | Responsible for SCAO RTC |
Jean-Francois Sauvage | Responsible for the SCAO module |
Name | Project Role |
---|---|
Taha Bagci | Optical Engineer |
Nick Cann | Spectrograph Optical Design |
Jorge Chao Ortiz | Optical Designer |
Ellis Elliott | PM Support |
Tea Seitis | RAL PM |
Ian Tosh | RAL Project Lead |
Name | Project Role |
---|---|
Josh Anderson | Mechanical Engineer |
Martin Black | AIT (IFS) |
Charlotte Bond | Adative Optics |
Ian Bryson | Consortium Project Manager Adviser |
Kenny Campbell | Electronics Engineer |
Neil Campbell | Mechanical Engineer (Cryostat) |
James Carruthers | Mechanical Engineer (ISS) |
William Cochrane | Mechanical Engineer (FPRS) |
Naomi Dobson | Systems Engineering Support / Sub-System SE (Cryostat / IRW) |
Chris Evans | UK ATC Co-I |
Oscar Gonzalez | UK ATC Science Team |
Joel Harman | Mechanical Engineer |
David Henry | Lead Optical Engineer |
William Humphreys | Graduate Project Manager |
Tom Louth | NGSS External Support Enclosure |
Dave Melotte | HARMONI Consortium Project Manager |
Chris Miller | Electronics Engineer (Cryostat / FPRS / IRW) |
David Montgomery | Lead Mechanical Engineer / Mech Eng for FPRS and ESE/NSS |
John Murray | Instrument Rotator and Wrap WP Manager / Mechanical Design |
Norman O'Malley | Electronics Engineer (FPRS / ESE / ISS) |
Lynn Ritchie | Project Assistant for UK ATC Workpackages |
Ruben Sanchez-Janssen | UK ATC Science Team |
Hermine Schnetler | Deputy Systems Engineer |
Noah Schwartz | AO simulation |
Patrick Smith | Optical Engineer / WPM for the Focal Plane Relay System |
Stuart Watt | Mechanical Engineer (FPRS CARs/NGSS) |
Martyn Wells | Optical Engineer |
Sandi Wilson | IPM UK ATC |
Name | Project Role |
---|---|
Mario Mateo | Co-I / Science Team |
Michael Meyer | Science Team |
Name | Project Role |
---|---|
Munadi Ahmad | Instrumentation Systems Engineer |
Michael Booth | Mechanical Design Engineer |
John Capone | Spectrograph optics PDRA |
Michele Cappellari | Science Team |
Fraser Clarke | Lead Systems Engineer |
Vanessa Ferraro-Wood | Project Administrator |
David Gooding | HARMONI DPhil Student |
Kearn Grisdale | Simulations (HSIM / RAMSES) |
Andrea Hidalgo | HARMONI DPhil student |
James Kariuki | Spectrograph Mechanical Design |
Ian Lewis | Spectrograph Systems Engineer |
Alvaro Menduina | HARMONI DPhil Student |
Zeynep Ozer | Institute Project Manager |
Roy Preece | PA/QA (UoX) |
Laurence Routledge | HARMONI DPhil Student |
Matthias Tecza | Instrument Scientist |
Niranjan Thatte | Principal Investigator |
Adam Lowe | Mechanical Design Engineer |
Dimitra Rigopoulou | Science Team |